0item(s)

You have no items in your shopping cart.

Lenco 12" x 18" Standard Trim Tab Kit without Switch Kit 12V Lenco 12" x 18" Standard Trim Tab Kit without Switch Kit 12V

12" x 18" Standard Mount Trim Tab Kit without Switch Kit- 12V

Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.

Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Kit Contents:

  • 2 each of 12-gauge stainless steel trim tab blades
  • 2 each of #15054-001 actuator with 6' leads and Deutsch plugs
  • 2 each of #30133-103 20' actuator extension wiring harnesses
  • 2 each of #15085-001 (116) upper mounting brackets with gland seal
  • 2 each of #50014-001 (119) lower mounting brackets
  • 1 each of the Lenco owner’s / installation manual
  • All necessary stainless steel mounting hardware

Specifications:

  • Suggested Boat Length: 26' to 36'
  • Length of Tab: 12"
  • Width of Tab: 18"
  • Hinge Height: 2"
  • Minimum Transom Height: 14"
  • Blades: 12 Gauge Stainless Steel
  • Finish: Smooth
  • Switch Kit: Sold Separately
  • Class: Fuel Efficient
  • Compliance: CE Certified
  • Compatibility: Any Boat
  • Actuators: 12-volt

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.


Brochure (pdf)

12" x 18" Standard Mount Trim Tab Kit without Switch Kit- 12V

Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.

Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Kit Contents:

  • 2 each of 12-gauge stainless steel trim tab blades
  • 2 each of #15054-001 actuator with 6' leads and Deutsch plugs
  • 2 each of #30133-103 20' actuator extension wiring harnesses
  • 2 each of #15085-001 (116) upper mounting brackets with gland seal
  • 2 each of #50014-001 (119) lower mounting brackets
  • 1 each of the Lenco owner’s / installation manual
  • All necessary stainless steel mounting hardware

Specifications:

  • Suggested Boat Length: 26' to 36'
  • Length of Tab: 12"
  • Width of Tab: 18"
  • Hinge Height: 2"
  • Minimum Transom Height: 14"
  • Blades: 12 Gauge Stainless Steel
  • Finish: Smooth
  • Switch Kit: Sold Separately
  • Class: Fuel Efficient
  • Compliance: CE Certified
  • Compatibility: Any Boat
  • Actuators: 12-volt

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.


Brochure (pdf)
Lenco Marine
$679.96
$534.99
Availability: In Stock

12" x 18" Standard Mount Trim Tab Kit without Switch Kit- 12V

Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.

Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Kit Contents:

  • 2 each of 12-gauge stainless steel trim tab blades
  • 2 each of #15054-001 actuator with 6' leads and Deutsch plugs
  • 2 each of #30133-103 20' actuator extension wiring harnesses
  • 2 each of #15085-001 (116) upper mounting brackets with gland seal
  • 2 each of #50014-001 (119) lower mounting brackets
  • 1 each of the Lenco owner’s / installation manual
  • All necessary stainless steel mounting hardware

Specifications:

  • Suggested Boat Length: 26' to 36'
  • Length of Tab: 12"
  • Width of Tab: 18"
  • Hinge Height: 2"
  • Minimum Transom Height: 14"
  • Blades: 12 Gauge Stainless Steel
  • Finish: Smooth
  • Switch Kit: Sold Separately
  • Class: Fuel Efficient
  • Compliance: CE Certified
  • Compatibility: Any Boat
  • Actuators: 12-volt

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.


Brochure (pdf)

12" x 18" Standard Mount Trim Tab Kit without Switch Kit- 12V

Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.

Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Kit Contents:

  • 2 each of 12-gauge stainless steel trim tab blades
  • 2 each of #15054-001 actuator with 6' leads and Deutsch plugs
  • 2 each of #30133-103 20' actuator extension wiring harnesses
  • 2 each of #15085-001 (116) upper mounting brackets with gland seal
  • 2 each of #50014-001 (119) lower mounting brackets
  • 1 each of the Lenco owner’s / installation manual
  • All necessary stainless steel mounting hardware

Specifications:

  • Suggested Boat Length: 26' to 36'
  • Length of Tab: 12"
  • Width of Tab: 18"
  • Hinge Height: 2"
  • Minimum Transom Height: 14"
  • Blades: 12 Gauge Stainless Steel
  • Finish: Smooth
  • Switch Kit: Sold Separately
  • Class: Fuel Efficient
  • Compliance: CE Certified
  • Compatibility: Any Boat
  • Actuators: 12-volt

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.


Brochure (pdf)
  • Any Product types that You want - Simple, Configurable, Bundled and Grouped Products
  • Downloadable/Digital Products, Virtual Products
  • Inventory Management with Backordered items
  • Customer Personalized Products - upload text for embroidery, monogramming, etc.
  • Create Store-specific attributes on the fly
  • Advanced Pricing Rules and support for Special Prices
  • Tax Rates per location, customer group and product type
  • Detailed Configuration Options in Theme Admin Penl
  • Any Product types that You want - Simple, Configurable, Bundled and Grouped Products
  • Downloadable/Digital Products, Virtual Products
  • Inventory Management with Backordered items
  • Customer Personalized Products - upload text for embroidery, monogramming, etc.
  • Create Store-specific attributes on the fly
  • Advanced Pricing Rules and support for Special Prices
  • Tax Rates per location, customer group and product type
  • Detailed Configuration Options in Theme Admin Penl
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page

#title#

#price#
×